Optimized for your
mobile device.
FREE
PRINTED CATALOG
 

 
You are here: Home > ELECTRONICS > AIR RIDER POWER AMP
Sort By:
Page of 1
AIR RIDER POWER AMP 3.5mm VERSION
Our Price: $129.00

The Air Rider Power Amp 3.5mm Version. The Air Rider uses the latest in audio technology to make this very powerful amplifier as small as possible. This small amplifier will raise the incoming audio by 20 hdb while at the same time not changing the volume or characteristics of your motorcycle's onboard radio or CB.

NOTE: This amplifies sound from a satellite radio or MP3 player into a standard audio headset, or even larger external speakers. This amplifies 38 watts per channel at 12 volt DC.
AIR RIDER AUDIO AMP WITH CB INTERRUPT
Our Price: $159.00

The Air Rider Audio Amp with CB Interrupt. This interface is designed to be used in conjunction with a 5 pin headset connected to a hand held CB with a patch cable. Simply plug this interface in line between your headset and patch cable. Connect to a 12vdc power source, and plug the 3.5mm stereo connector into any audio device. Music will be amplified and played directly into your headset. When a CB transmission is made or received the music will cut out until the transmission ends.
AIR RIDER POWER AMP 5 PIN VERSION
Our Price: $159.00

Air Rider Power Amp 5 pin Version. Air Rider uses the latest in audio technology to make this very powerful amplifier as small as possible. This small amplifier will raise the incoming audio by 20 hdb while at the same time not changing the volume or characteristics of your motorcycle's onboard radio or CB.

NOTE: Only the input from the 3.5mm connector is amplified, the sounds coming through the 5pin wil be unchanged. This unit amplifies 38 watts per channel at 12vdc.

Units are also available without the standard 5pin din connectors for those who just want to amplify a Walkman type radio to a standard radio headset.
AIR RIDER RADAR INTERFACE WITH 3.5mm ADAPTER
Our Price: $159.00

Simply plug the small 3"x2"x1"  interface between your standard 5-pin headset and the bike plug., attach to 12vdc power, and plug the 2.5mm mono cable into your radar detector. Works with all radar detectors with a 2.5mm audio output socket. When you get a signal from your radar detector, the right ear speaker will mute and the signal from the detector will play in that ear. When the signal stops, the speaker will return to normal.
AIR RIDER RADAR AND GPS INTERFACE WITH 3.5mm ADAPTER
Our Price: $159.00

The Radar/GPS interface comes as a dual unit that will take input from both the radar detector and the GPS. The Radar/GPS interface simply plugs in line with your standard 5-pin headset and bike plug. Connect to a 12vdc power source and plug the 2.5mm mono jack into your Radar Detector & GPS. When you get a signal from your radar detector or GPS, the right ear speaker will mute and the signal from either unit will play in that ear. When the signal stops, the speakers will return to normal.